On Thursday evening I had a knapping session with Nick Overton and Rob Howarth. The ‘dish of the day’ was a toughened glass microwave turntable found in Nick’s garden. It took me a couple of hours to be able to get beyond the raised edge that was the outer lip of the turntable. As such it has been a masterclass in working angles and really got me thinking. Following the published methods is very interesting and the previous post focused upon managing the curve on bottle glass. However, this toughened and lipped turntable presented a different set of problems. It has made me think about the difference between aboriginal examples with plano-convex, and those with lens like cross sections. I wonder if plate glass examples like this lead to lens like cross sections because both faces are worked in a similar manner? I finished the above preform off this morning.
As can be seen, it has reduced in size considerably, and this is a reflection of working to get increasingly shallow angles and therefore longer removals.
This image shows better the degree of removals from the surface, and I can now report that the really long removals are in fact a combination of well prepared platforms that allow pressure to travel along a shallow surface angle. These shallow angles come from transforming a perpendicular edge into a steep angle, and then using this steep angle as a platform to take another removal that creates a longer shallow angle one. None of this discussion is new, however I am beginning to be able to apply these aspects systematically within a meta-approach to either plate glass or bottle glass. I am making practical sense of the textual descriptions that do not really separate out how these processes change (or remain the same) depending upon the materials used. It would be useful now to revisit the Manchester Museum examples to see if I can recognise if the source material was either plate or bottle glass, and if this actually does reflect a plano-convex or lens like cross section. Anyway, to para-phrase Nick, it has been immensely satisfying transforming this microwave turntable into something far less useful!